Take Off My Aviation Era

"what's the situation?"

　　Zhuang Jianye is very puzzled. The friction welding machine is not a model airplane. It can be smashed out with a little bit of sawdust. Not only is the technology complicated, but the craftsmanship requirements are also very high.

Although Yonghong Factory is strong, it has to get scrapped prototypes from brother factories to make it. Even if the 23rd branch plant is against the sky, the strength of Yonghong Factory is the same as that of the Yonghong Factory. Feeling embarrassed, three days, isn't it a joke.

　　 "I know you don't believe it, let me be honest with you, the friction welding machine I made was not treated as a waste in the factory, but it was sent to the Jiu Branch Factory as a display as a mascot."

"The mascot?" Zhuang Jianye was even more confused. As far as he knew, the friction welding machine he made was scrapped because of the introduction of the refrigerator production line. I heard that it was dismantled so that there were no iron sheets left, and all were thrown into the smelting furnace to melt into molten iron. How come it became a mascot again?

"The old model that was destroyed was the first old model. Later, I made another one and added a sequence controller to make a new type of friction welding machine with automatic functions. The factory thought it was a long-faced thing. Domestically, it is called to realize automation, so it was asked to go to the nine branch factory as a must-see content for leaders at all levels to visit."

　　 Peng Chuan said plainly, but Zhuang Jianye opened his mouth wide when he heard it, and added a sequence controller? It's incredible, you know that is the basic technology of CNC in the future.

　　 The core of numerical control is not how bad the computer is, nor how powerful the chip is, but the internal logic applied to the device itself.

　　 To put it more intuitively, when the equipment runs, when it stops, when to change the tool, and when the blank feed is all in these logics.

　　 The sequence controller is the key device that controls each node of the device through circuit signals.

　　 Early sequence controllers were just simple circuits based on relays, and later developed into programmable sequence controllers, until later computer-based sequence controllers.

But no matter what kind of sequence controller, the basic logic is inseparable, that is, you have to understand and understand every link in the equipment, and then find the optimal state of the equipment in the processing process, and then program it. The logic is the best.

One of the most difficult is to grasp the equipment accurately and thoroughly, because it is not only as simple as mastering the essentials of the equipment, but also to keep improving every part, every action, and every link. The process is not inferior. Therefore, we are training a senior technician. Only in this way can we re-inject the mastered experience and skills into the equipment through logic programming.

Because of this, even in the later generations when numerical control equipment has long been popular, those skilled and advanced technicians are still priceless. It is not that the parts they process are better than numerical control equipment, but their unique experience can optimize the equipment in turn. Insufficiency, which makes the equipment performance to a higher level.

When Zhuang Jianye was in Yonghong factory, he thought about the key technology of sequence controller, and even planned to apply it to the shot peening machine. Unfortunately, a series of changes later caused this idea to be directly stranded, but he was given it by Peng Chuan. Got it out.

　　 "How is it? I realized one of your ideas at the beginning. Was it a surprise? Was it unexpected?"

Peng Chuan was very satisfied with Zhuang Jianye’s astonished appearance. He sat on the back seat of the bicycle and laughed quack. Originally, he wanted to come to the 23rd branch to do technical guidance and give Zhuang Jianye a surprise. Unfortunately, he was put forward by the factory. Just treat it as a fame, but this does not prevent Peng Chuan from appreciating Zhuang Jianye's surprised expression, well, very good, very rare.

　　 "No, how did you do it?" Zhuang Jianye asked in surprise after a long time.

　　"Just as you said in the dormitory at the beginning, an electrical cabinet composed of a stepping sequence controller, an operating simulation table, and strong and weak current actuators.

　　 The structure is also built with the CK-17 diode matrix sequence control device as you said. After it was made, it was tested several times and the effect was good. The programming is not only simple, but also has strong versatility.

Of course, it took me more than half a year to work on this stuff. Fortunately, I worked in the computing office for a while, and I still managed to handle the calculation and programming. The key is to understand the equipment. Don’t you know, I do it all day long. It's like your monkey, you can see it all inside and out.

　　 I’m not telling you, Lao Zhuang, I’m currently operating the friction welding machine with my bare hands. Not to mention the level of an 8-level worker, the level of a sixth-level worker can always be reached. "

Peng Chuan was very contented. When he was in the dormitory, Zhuang Jianye used a shot blasting machine, and he was a friction welding machine. The two of them got together to talk about the future architecture of the equipment. One of them was automatic control and programming. In this regard, Peng Chuan is a weak point, but he can’t hold back his love of being horny. If he’s fine, ask and learn more, and slowly master the tricks.

　　 I originally thought that the two would work together to complete the automatic control and programming of the equipment, but it didn't happen that Zhuang Jianye was transferred to the 23rd branch. Peng Chuan could only play the trick slowly by himself, but he did the trick.

So he is very happy, especially when facing Zhuang Jianye. You must know that since he knew Zhuang Jianye his IQ has often been crushed. He wanted to kill him a long time ago. Now he finally has something that he can do. It’s strange to be unhappy. .

　　 As for his idea was born out of Zhuang Jianye, Peng Chuan didn't take it to heart. He has contributed everything, but can't he be happy?

　　Zhuang Jianye naturally makes Peng Chuan happy. With a sequence controller, Peng Chuan can do whatever he wants. It is necessary to know that the sequence controller is too critical for the future of numerical control.

There is no way that many of the key equipment in the aviation industry are not bought by money~www.wuxiaspot.com~ Take the shot blasting machine that Chenggong Factory is eager to ask for. Foreign aviation manufacturers are also their own. Therefore, if the 23rd branch wants to take the aviation road in the future, independent design and development of equipment is a must.

　　 And numerical control is the only way for the development of future equipment. If it can be grasped as soon as possible, it will definitely help the future development.

Zhuang Jianye originally wanted to wait for the 23rd branch to stabilize its main business and accumulate profits from civilian products to a certain extent, and then consider this long-term reality. He did not expect that Peng Chuan would take this surprise to the back seat of his bicycle. .

　　 To be honest, Peng Chuan is a sloppy old man. If he is a beautiful lesbian, Zhuang Jianye can rush to kiss the two and have fun together.

But happy to be happy, the reality is still to be faced, so Peng Chuan changed the conversation and reminded Zhuang Jianye: "If you say a thousand things and ten thousand, you have to fix the nine branch factory first. Liang Guodong is not going to deal with you. It’s not easy to get the equipment for him to earn political achievements!"

　　Zhuang Jianye, who was still pedaling, smiled when he heard the words: "I might have to work a little bit for the other branch plants, but the nine branch plants...it will be solved after a while."