Rebirth 2008: I Can Make Money Reading

Chapter 191 Daily life (seeking order)

(The second half of this chapter is daily. If you don’t like it, you don’t need to order it. This book is first published on Qidian’s Chinese website. There are many easter egg chapters posted by Lao Nong, which cannot be seen on other platforms. You can only read it on the Qidian APP, and the content will be updated two days later)

Mu Yang opened the reading system,

achievement point shop,

Search for "arc welding machine" silently.

Soon, dozens of technologies appeared before his eyes.

Mu Yang has searched before, and he has already locked in his mind which technology to buy.

Turn to the second page and quickly find the technology he wants.

"An ultra-low spatter carbon dioxide gas shielded welding IGBT welding machine" (referred to as the second welding machine)

It's not zero splash yet, to see if it can reach the real ultra-low splash, Mu Yang carefully studied its introduction.

[Introduction: IGBT inverter control is used... Using droplet transfer stabilization control and overlapping control technology to finely control each stage, including short-circuit initial current control, droplet neck control and droplet acceleration transition control, etc. And an arc control system is added to dynamically adjust the arc ignition energy to achieve a significant reduction in spatter...]

After reading the introduction, I found that there are currently 3 versions to choose from.

[SW1.0, domestic first-class level, price: 15 achievement points]

[Subject requirements: Mechatronics Level 5, Circuit Design Level 4, Welding Technology Level 5, Mechanical Design Level 5, Software Design Level 5...]

【SW2.0, world-class level, price: 30 achievement points】.

【SW3.0, world-leading level, price: 50 achievement points】.

[Hint: For the same technology, you can buy the highest level, including the second-lowest version technology, and you can also buy it step by step. 】

After reading the introduction, Mu Yang has marked all the subject requirements of SW2.0 as green, and he can directly click to buy.

Higher technology is gone, and at the fifth level of the system, SW3.0 can be purchased.

But to buy SW3.0, welding technology and software design require level 6.

The required level 6 subject is one more than that of the laser, so he can easily understand that there are many things on the host of the arc welding machine, and there are subject knowledge.

Start buying from SW1.0 first, and absorb low-level technical knowledge first.

Suddenly, his head swelled, and he felt that a lot of knowledge and memory about arc welding machine manufacturing technology flooded into his mind, including the principle of arc welding machine, design drawings, design instructions, and calculation books, not only in terms of design, There are also its manufacturing process and supporting process equipment, the proposed plant size, how to plan...and the final assembly process.

Well, it's still like a laser.

After absorbing the knowledge points of SW1.0 and SW2.0, Mu Yang upgraded the welding technology and software design to level 6.

It takes 20 million experience to upgrade a subject to level 6, and he still has 70 million experience that is useless, just to prevent buying technology for fear of lack of experience to upgrade the subject.

Welding technology and software design are already at the fifth level, so it took a little less experience.

After upgrading the two subjects to level 6, continue to purchase SW3.0 technology and continue to attract knowledge points.

It is purchased in three levels, and the achievement points spent are also 50 achievement points.

Ten minutes later, he finally understood the SW3.0 technology.

The core is actually the process control software of the host machine, no wonder it requires a level 6 software design.

This welding machine technology includes digital welding machine control, intelligent process control, and system integration network.

The operator can automatically generate the welding process by inputting the welding process conditions such as welding material type, thickness, wire diameter, groove form, etc., without fine-tuning the process.

Mu Yang thinks it is very good to have this function, and it has already reached semi-intelligence.

In fact, welding machines of domestic and foreign brands also have intelligent process control, such as Panasonic, but they are somewhat complicated.

Not to mention that welders don't understand, even ordinary welding engineers, some of them have figured out the pulse characteristics, arc characteristics, waveform control and other functions on the welding machine. Make it too complicated, but not easy to use.

If it can be simplified and easily used without research, then it is a good device.

Otherwise, no matter how powerful the function is, it is a useless device that workers will not use.

He was so excited that he couldn't fall asleep. He turned on the bed lamp, sat at the desk and turned on his laptop, and started to write the design proposal using WORD.

Half an hour later, he had already ordered the model.

Muyang plans to develop two models, namely XH-350US1 and XH-500US1, 350 means the rated current is 350A, suitable for welding thin plates with small and medium currents, 500 type is used for welding medium and thick plates, XH means the first letter of "Xinghai" in pinyin, US means Ultra-low spatter, which means ultra-low spatter, and the following 1 means the serial number.

The principles and functions of the two models are the same, only some hardware is slightly different, the main difference is the power of the welding power source.

Of course, the two models can be used in common. For example, the 500 model can adjust the current to more than 100, and it can also weld thin plates. It is the same as processing small parts with a large machine tool, but it consumes a lot of electricity.

Product serial number: XH-500US1

Load rate: 60%

Dimensions: 416×575×662mm

Weight: 98KG

Structure: main engine, wire feeding device, welding cable, welding torch, gas regulator.

The core is of course the host computer, including welding power supply, control system, printed circuit board, instrument and so on.

If these two second-end welding machines can be developed, they will break the monopoly of foreign brands in the domestic high-end second-end welding machine market.

In this way, Muyang has truly taken root in the welding field and has its own welding base, which is of great significance to the development of other basic industries.

The field of welding is too wide. There are dozens of types in total. It is good for a welding engineer to be familiar with several types. Some welding methods may not be seen with their own eyes in their entire lives.

After making this arc welding machine well, Muyang plans to develop other fields across borders.

The next main line of technical thinking is clear, and I feel that the whole person is smooth.

Turn off the computer, lie on the bed, and fall asleep quickly.

When Mu Yang woke up in the morning, he didn't wake up naturally, but was woken up by the broadcast called by the village chief.

Before it was six o'clock, the broadcast was called, saying that the captains should come to the village committee office for a meeting at 8:30.

"The village chief is addicted to shouting on the radio!"

He got up, brushed his teeth, had breakfast, and went back to his room to continue writing the design plan of the second-best welding machine.

At ten o'clock, his cousin Mu Qing came to him and asked if he wanted to chop black sugarcane together.

In winter in Greentown, the temperature during the day is in the 10s and 20s, and it is only slightly colder at night. This is a good time to go out and bask in the sun.

It just so happened that the weather was fine today, and Mu Yang also wanted to go out for a walk and bask in the sun.

"Do you have any at home?"

"Yes, my mother planted two parts of the land, and I usually cut it to eat, and now there are quite a lot."

"Okay, I'll take the machete."

Hearing that he was going to chop black sugarcane, his younger sister Mu Xiaoling also wanted to go.

A few minutes later, the two big ones and one small one walked towards the mountains.

Mu Yang didn't drive, and his home was only seven or eight hundred meters away from Mu Qing's black sugarcane field.

On the way, he met many villagers who greeted him warmly.

"Xiaoyang, that's right. When you make a fortune, remember to give back to your hometown and never forget your roots."

"Yangzi, you are so generous. I donated 1 million as soon as I said it. I will definitely participate in road construction. I don't have much money to donate, but I still have strength."

Mu Yang greeted the villagers politely. Everyone no longer regarded him as an ordinary college student, but as a boss, who respected him for donating money to build roads.

Hearing that he was going to chop black sugar cane, these villagers said that they should go to his house to chop.

Mu Yang knew that these villagers said polite words, it would be fine to chop off one or two, they would think they valued him, and would be happy instead, if they really wanted to chop him off, they would probably scold his mother.

Only Mu Qing didn't quite understand and scratched his head in confusion. He felt that one million yuan was a lot, so why would he be willing to donate it to the village.

Now, Brother Yang is his idol. Now that he is on vacation, he sticks to his cousin's house all day long, and sits on the threshold looking for a comic book by himself.

I heard Uncle Yang say that he was so smart because he liked to read comic books when he was a child, and he also wanted to learn from Brother Yang.

After a while, the three of them came to the sugarcane field. Mu Yang found a good-looking one, and it was so pressed that it was pulled out. It could not be chopped with a knife, and the roots were not easy to clean.

Cut it down, remove the too tender end, throw it on the ground, and use it as a root seed later.

After peeling the skin, the three of them ate a piece each, smiling and squatting on the grass, not caring about the rotten grass and dirt on the ground.

If the employees of the Xinghai Group saw the boss eating sugar cane in such a shameless way, they would probably laugh out loud.

"The sugarcane from my hometown is still delicious, I haven't eaten it for a long time." Mu Xiaoling giggled.

Mu Qing also laughed, but suddenly, he couldn't laugh anymore.

"Brother, my tooth is loose, it seems to be broken, and I was hit by my sister's crow's mouth!" Mu Qing put on a bitter face, put her right index finger into her mouth, and after digging for a while, she really pulled out a piece of decayed tooth with a a trace of blood.

"Pooh!"

Mu Qing's tongue rolled back and forth to lick the cavities, feeling a little uncomfortable, and she didn't even want to eat sugar cane, Mu Xiaoling couldn't help laughing when she saw it.

"Sister, it's all your fault. You made me laugh, and I accidentally broke my teeth."

"Hehe, it's my fault. I must not have brushed my teeth very often, maybe I didn't brush my teeth at night."

"Do you want to brush your teeth at night?" Mu Qing felt it was a waste of toothpaste.

"Ask brother, do you want to brush?"

"Brush before going to bed." Mu Yang watched his cousin vomit a few times, couldn't help laughing, and said, "It's okay, it's normal for the deciduous teeth to fall out, and new ones will come out soon. You should pay attention to brushing your teeth at ordinary times. You should brush your teeth up and down, not left and right. Swipe back and forth."

Mu Qing heard Brother Yang say that he brushed his teeth incorrectly, and asked, "Brother, I always brush left and right, so I can use my strength, isn't it right?"

"That won't work, you have to change it in the future, or your teeth will be pitted and ugly, and then you won't be able to find a wife." Mu Yang told him seriously, not to mention him, an adult in his twenties or thirties, Brushing methods are not corrected.

His parents didn't understand this either. Mu Yang only knew the correct way to brush his teeth when he was in junior high school.

I told my cousin some things about brushing teeth properly, and then I started chopping sugar cane, and took a few of them home.