Rebirth 2008: I Can Make Money Reading

Chapter 163 Just like that, Mu Yang was convinced

Ten o'clock the next morning.

The three of Muyang set off for Sifang Factory and arrived in a few minutes.

However, the car couldn't go in directly, so Mu Yang asked Li Yiyi to park the car beside the gate, and he wanted to get out of the car and call Feng Younan, the chief engineer of Nanche.

Feng Younan has been working in Sifang Factory for a long time, and he also proposed the invitation to Mu Yang this time.

After the fat man got out of the car, he glanced at the gate with a width of 20 to 30 meters and praised: "This company looks very large, magnificent."

Mu Yang replied: "Of course, it covers an area of ​​more than two thousand acres and has an annual output value of several billion yuan."

"Yangzi, you came here from City H all the way, and this company didn't hang a banner at the gate to welcome you, but asked you to wait here." The fat man complained in a low voice, feeling that Mu Yang was not taken seriously.

In Fatty's mind, Mu Yang is already considered a person, seeing him being looked down upon by other companies, he couldn't help feeling sorry for Mu Yang.

"Fatty, don't worry about this, Xinghai Company is not well-known in the machinery industry, and I'm not a big shot, the person who invited me was Feng Younan, the group's chief engineer, and it's a personal invitation.

Even if he is the chief engineer of the group, he is not a tyrant. The interpersonal relationship in a state-owned enterprise is complicated, which is not as simple as you think.

Large state-owned enterprises like this rarely hang banners unless the superiors come to inspect them. "Mu Yang doesn't feel ashamed, after all, he has lived two lives, although he can't be flattered, after accumulating life experience, he must be much more indifferent to social affairs than a fledgling college student like Fatty.

In any case, he is currently a small figure in a private enterprise.

He has a system that is awesome, but this is his secret, and he can't show it off in front of others: I have a system, so I don't care about you.

"Okay, I don't really understand these things." The fat man stopped talking, and when he went to other people's territory, he would not make trouble, just like a little follower, he would do whatever Mu Yang asked him to do.

Mu Yang called Feng Younan and said he had arrived at Sifang Factory.

After hanging up the phone, I waited for more than ten minutes before I saw Feng Younan. After all, he was in his fifties or sixties, and he was out of breath when he walked in a hurry.

Feng Younan was also shocked when he saw the Rolls-Royce beside Muyang. He didn't expect that Muyang's car was so high-grade, even higher than the general manager of the group.

Mu Yang read the look of surprise in his eyes, and was a little embarrassed. Driving a Rolls-Royce to other people's sites is indeed a bit high-profile, but it is also the best way to show one's own strength.

Feng Younan laughed loudly, and walked over to shake hands with Mu Yang: "Boss Mu, the journey was full of dust and dust, and it was hard work. I thought you were coming by plane, and I would send someone to pick you up. Unexpectedly, you drove all the way here."

He didn't know much about Xinghai Machinery Company, but he had read the company's profile at the Industrial Fair.

He suddenly felt that both himself and the leaders of Sifang Factory underestimated Xinghai Machinery Company.

"Mr. Mu, I hope you don't mind the poor hospitality." Feng Younan greeted him politely.

Mu Yang smiled lightly: "Mr. Feng, you are welcome. I am here for technical exchanges. Our company sells equipment to your company. Our after-sales service must be in place. I am still worried that I will not be able to help you solve the problem. When the time comes, I will Scold me."

Feng Younan waved his hand and said: "Where, where, your hand-held laser welding equipment is very useful and has solved our welding deformation problem.

However, our production workshop and process engineers are not clear about the laser welding seam standards, such as the width of the weld, the reinforcement height, the penetration depth is qualified, and the range of equipment parameters is more appropriate. "

Mu Yang said: "Well, this is easy to handle. In fact, our product manual also explains the recommended process parameters and welding seam standards."

Feng Younan sighed: "They have read it, but they can't understand some details. There are still many problems in the specific operation details that need to be connected with your company, so I can only trouble your company to send technicians to come over. I didn't expect you to come here in person. .”

Mu Yang apologized slightly: "It would be better for me to come here in person. After all, it is a product designed by me. It is estimated that the problems you encounter cannot be solved by ordinary technicians. I am also very sorry for causing trouble to you."

Feng Younan waved his hand and said it was all right. The problem did not lie in the quality of the equipment. He was still very satisfied with the equipment of Xinghai Machinery Company.

"Well, it's good that you're here, let's advance to the company." Feng Younan asked the security guard to lead Li Yi to the parking lot, while he walked side by side with Mu Yang.

Mu Yang looked around Sifang Factory while walking, and asked casually: "Mr. Feng, what is the output value of Sifang Factory this year?"

"This year, it's estimated to be around 6 billion yuan."

"I heard that the high-speed rail is all made of aluminum alloy, the subway is made of stainless steel, and the 160-kilometer train is made of carbon steel. Is this correct?"

"Well, indeed, you know it quite well. Oh, I almost forgot that you are also familiar with the welding process of the car body."

Feng Younan and Mu Yang walked and chatted, and walked towards the subway car production workshop.

The fat man followed behind with the Muyang computer bag on his back, but the driver Li Yi didn't follow, he just sat in the car and waited for the boss.

Sifang Factory has a large location, and there is a distance from the company's gate to the subway car production workshop.

With Feng Younan in charge, the journey went smoothly.

After walking through the office area and coming to the production area, Mu Yang saw the spacious factory building.

The floor was painted brightly. Within the area marked by the yellow line, carriages were elevated one by one. At a glance, Mu Yang saw several rows of carriages. These carriages had been fully manufactured and electrical installations were underway.

After walking a certain distance, Mu Yang saw the aluminum alloy car body manufacturing workshop.

The manufacturing process of the aluminum alloy car body starts from the underframe, the underframe is welded on the front, the front and back are polished, the floor is paved and the airtight test is carried out, the end wall is assembled and welded, the front, back and side walls of the roof are automatically welded, and the overall processing , cab welding...

Finally, the above-mentioned major components are assembled and welded, straightened and flattened, and after the rain test is completed, painting begins.

The fat man followed behind, looking around, very curious, and made a faint voice, "Oh, so it was born like this."

Passing through the high-speed rail production workshop, Feng Younan brought Mu Yang and Fatty to the stainless steel car body production workshop.

After entering the workshop, some workers saw Feng Younan bringing two young people into the workshop, and they were also a little curious:

"Who is the young man next to Mr. Feng? You still use him to accompany you, a client? It's a little different."

"Who knows, seeing them talking and laughing, maybe it's his son."

"My son, I heard that Mr. Feng only has an eldest daughter, and she is already married."

Listening to these workers' discussions, it seems that Feng Younan is quite popular among the workers, which is related to the fact that he often takes root in the front line of production.

Feng Younan came to the production area of ​​the No. 6 car. After seeing the welding supervisor, he asked him to greet the welders who operated the laser welding to gather together, saying that the experts from the handheld laser welding manufacturer had come.

The welding supervisor looked around, a little confused: Where is it? Or the young man next to you? Not like it.

They have a lot of experience in this line of work, and they are generally old enough to be called experts, at least not a boy in his early twenties!

The welding supervisor is suspicious of Mu Yang and Fatty beside Feng Younan.

Although he had doubts in his heart, the welding supervisor would not ask Mr. Feng face to face, so that Mu Yang and Fatty could not get off the stage. After all, Mr. Feng brought them here.

The welding supervisor has a good relationship with Mr. Feng, and Mr. Feng often helps them solve technical problems in the workshop. Some time ago, Mr. Feng mentioned this to him, and asked manufacturers of hand-held laser welding to come over for technical exchanges.

In fact, when Xinghai Machinery Company transports the handheld laser welding equipment to the workshop of Sifang Factory, the technicians will follow the truck and provide theoretical and practical training for the welders of Sifang Factory. The time is relatively short, but basically Baojiaobaohui, wait for them to get started before leaving.

But after using it for a month, the welder found that many details of hand-held laser welding were unclear, so he suggested that Xinghai Machinery send people to the site to give explanations and training, preferably experts in this field.

More than ten minutes later, dozens of welders gathered in the production area of ​​No. 6 subway car.

The workshop was a little noisy, Feng Younan stood at a higher place, pointed at Mu Yang, and said loudly:

"Let me solemnly introduce to you, the person next to me is the general manager of Xinghai Machinery Company, the inventor of handheld laser welding equipment, Mr. Mu Yang Mu.

Mr. Mu is very young, but he is very proficient in welding technology. If you have any questions about laser welding technology, you can ask Mr. Mu for advice. I hope you will cherish this hard-won opportunity. Mr. Mu came all the way from H City. not easy. "

After the introduction, everyone took a serious look at the young man in front of them.

They even invited the boss to come instead of sending technical engineers. Some welders did not believe what Mr. Feng said, and felt that it was just polite words from the people on the scene.

Muyang was tall and said politely: "Mr. Feng, you are welcome. Sifang Factory is a great company that has created countless national firsts in China, such as the first domestically produced high-speed EMU with a speed of 300 kilometers per hour... So, I can come It is a great honor to come to Sifang Factory to communicate with you.”

Mu Yang praised the Sifang factory first. When he said that these factories are number one in the country, these workers immediately showed proud expressions on their faces.

Mu Yang noticed the expressions of these workers and felt that the timing was about right, and then said, "Although handheld laser welding is an independent invention of my own, it cannot be said that I am very proficient in laser welding operations.

Maybe the masters are already proficient in the application of laser welding equipment, and have summed up their own set of experience. I also hope that I can learn some dry goods from the masters. "

Mu Yang is very humble, but he does not belittle himself. He calls the solution to the problem an "equal exchange". These masters also want to save face. He said so, and these masters instantly raised their favorability for Mu Yang and gained "status" Only when we are equal can we open up and communicate with each other.

After Mu Yang finished speaking, he kept a faint smile on his face.

A master raised his hand and asked politely: "Mr. Mu, hello, I would like to ask, what color is more suitable for this laser welding seam? Some colleagues said that silver white is the best, but I don't think so, golden yellow most."

Mu Yang turned his head and saw that the person who asked the question was a teacher, he didn't think too much, and answered directly: "This teacher asked a good question, and the key point of laser welding came up.

We are welding stainless steel. We used argon arc welding before. When the welding current is low and the welding speed is fast, the color of the weld seam is silvery white. As the welding current increases or the welding speed slows down, the color of the weld seam turns golden yellow. Blue, to dark blue, to gray.

The same is true for laser welding stainless steel. If it is silvery white, it looks good, but there may be poor fusion and shallow penetration. The seam toughness is deteriorated.

It's okay if the weld is a little gray, anyway, the weld will eventually be washed white. "

"Thank you, Mr. Mu, I finally understand."

Just after Mu Yang answered this question, everyone felt that he answered the question very well. He was indeed an expert, so they dare not underestimate him.

Then, another worker master rushed to ask: "Mr. Mu, when the arc is closed, the welding torch always sticks to the wire. How can this be solved?"

Mu Yang quickly replied: "The question asked by this master is indeed very common, and it is also a troublesome matter.

If the wire sticks, it means that the wire is not blown.

Master, you can increase the welding power and adjust the scanning width to about 2.7mm. Also, check whether the laser focus hits the welding wire. If the laser cannot hit the welding wire, it must not hit the welding wire.

In addition, it is also related to the posture during welding. Laser welding is not as particular about closing the arc as other arc welding. After welding, it can be drawn directly along the direction of welding wire retreat without staying on the weld seam.

If the wire sticks, click it again to melt the wire. Occasional sticky silk, this is hard to avoid. "

When Mu Yang was explaining, many workers suddenly understood, and even shouted "Oh, so that's the case, no wonder\

,"Seeing that the workers listened to it, I felt that Mu Yang was not in vain. Although the laser welding equipment has been used for a month, the welding engineers still can't understand the principle. This equipment is easy to master, but there are some key points that are still not clear. Easy to figure out.

Next, many workers asked questions, and Mu Yang answered the adjustment of process parameters such as scanning speed, scanning width, peak power, duty cycle, pulse frequency, etc., and the impact of each process parameter on welding, and even I also did the welding myself.

These workers were completely convinced by Mu Yang, they not only knew the technique, but also were quite proficient in practical operation.

Perhaps the handheld laser welding operation is nothing, and it can be used proficiently without learning for a few days.

To everyone's shock, next, Mu Yang also showed them argon arc welding and large swing welding, and it was 45-degree fixed pipe butt welding with obstacles!

This position includes horizontal, horizontal, vertical, and overhead welding, and there is interference during welding. The difficulty of welding is the most difficult among the test items.

Let’s use this analogy. If the learning difficulty of laser welding is 10 points, 60 points for argon arc welding flat welding, 90 points for horizontal welding, 100 points for vertical welding, and 150 points for overhead welding. The 45-degree fixed pipe butt welding with obstacles interferes with obstacles, and the welding difficulty is 200 points.

Passing is 200 points, but Muyang Welding is very beautiful, you can score 500 points!

Therefore, the welders around were admired, and even Feng Younan was shocked.

"Niucha, the best welder in our factory can't compare to Boss Mu!"

"Yes, hand-held laser welding is a fool's way, but this argon arc welding is purely based on personal skills, and you can't do it without practicing for a few years. Mr. Mu, you are so young, how did you master this skill? This fish scale welding looks like a machine. Welding makes no difference."

"I haven't been able to learn this big swing technique well. I can't swing it well! And it's still such a high position difficulty!"

"I think the big swing is easy to learn. The problem is that vertical welding and overhead welding are difficult to weld, and obstacles are added. The problem is that the welding effect is very good, and there is no rework. I have to admire it." One of the experienced welding technicians The welder was surprised.

Seeing the workers' admiration, Mu Yang had the nerve to say that he was cheating. His welding skills were already at the fifth-level intermediate level.

He could only laugh and said, "Practice makes perfect, and you can do it too."

"No matter how proficient ordinary people are, they can't learn it. It seems that learning this big swing welding depends on talent. Mr. Mu is amazing!" The workers gave him a thumbs up. Many of them used to weld argon arc welding. With handheld laser welding, the workload of argon arc welding is greatly reduced.

Through communication, everyone knew that Mu Yang was a sophomore, but he was already the boss of two companies, and his assets were huge, worth tens of billions of yuan, and the company's annual output value was also billions of yuan.

Of course, this is from Fatty, he was a little upset that Mu Yang was ignored by Sifang Factory when he entered the door.

Feng Younan didn't know much about Mu Yang's situation, let alone the other welders.

Everyone was shocked again.

At such a young age, he is worth tens of billions of dollars. In terms of assets, he is no worse than Sifang Factory.

The most admirable thing for these workers is that Mu Yang's welding skills are better than any of them. Some people can't match him after more than ten years of practice.