Chaoshen Technology Trading Mall

　　 The special steel produced by trial production for the first time was unsuccessful, and Wang Bin's face was not good.

　　 "Okay! Manager Yan." Wang Bin nodded and said.

　　 After Wang Bin finished speaking, Manager Yan walked out of the workshop they were in and walked to the workshop next to him.

　　Wang Bin walked towards the production line, came to the special steel that was also listed just now, and knelt down and took a closer look.

　　This time the failure of smelting special steel, Wang Bin was not very surprised, because many people on the production line did not have experience in smelting steel.

　　 Even those who have some experience in steel smelting, most of them have only smelted ordinary steel experience.

No special steel has been smelted, not to mention that the smelting method of each special steel is different, and the formula and process are also very different. If it is the same as the last production of glass, it is smelted at one time, then it is called Wang Bin was surprised!

Subsequently, Wang Bin saw off some scraps from the steel in the mold that failed to be smelted, and took it to the laboratory in the new industrial zone, preparing to test the elements of these steels, whether it was during the smelting process, and the workers were concerned about the additions. The raw materials are not well grasped.

Like the old industrial area, Wang Bin’s laboratory is also located in the new industrial area, and the laboratory in the new industrial area surpasses the laboratory in the old industrial area in terms of area, and the equipment in the laboratory is also much better than the old one. The laboratories in the industrial zone are more advanced.

　　 In addition, the R&D team of Tiangong Technology who was waiting for Professor Hu in the old industrial area has also been arranged by Wang Bin to the new industrial area.

　　 When Wang Bin entered the laboratory, Professor Hu and others were busy in the laboratory.

　　 Of course, the research and development project of Professor Hu and others is the previous project that Wang Bin gave to Professor Hu and others, that is, the bearing steel formulation process improvement project.

　　When Wang Bin entered the laboratory, Professor Hu also saw Wang Bin come in, so he asked Wang Bin: "Mr. Wang! How is the trial production situation on the production line? Is the equipment running normally?"

　　"Yes! Professor Hu, the special steel production line has been installed, and the production line was in the trial production process without any problems.

　　 It's just that the workers on our production line are novices, and the first furnace of special steel in the trial production process was not successfully smelted. "

After speaking, Wang Bin handed the failed special bearing steel to Professor Hu, and then said: "Please see, Professor Hu. This is the failed product smelted in this trial production. I want to test it. Which link has the problem?"

And after Professor Hu took the failed product in Wang Bin’s hand, he looked at it for a while and said: “Mr. Wang, this failed product, according to my judgment, it seems that there is not only a problem with the formula, but at the same time. The temperature during the smelting process is definitely wrong."

Professor Hu turned around and found a piece of steel in the laboratory that seemed to be similar to the failed product and handed it to Wang Bin. He continued, “Please look at Mr. Wang. This is the failure of an improvement in our experiment. After the product."

　　Wang Bin took the piece of steel handed over by Professor Hu and looked at it carefully. The surface of this piece of steel is the same as the failed piece of steel that Wang Bin gave to Professor Hu before. It is also dark.

　　 At the same time, there is a little rust-like red on it, but the red on this piece of steel is more red than the failed fret he had handed to Professor Hu before.

　　 But seeing this piece of material, Wang Bin already knows the reason for that piece of failed product. As Professor Hu said, this is not just a matter of adding raw materials, the workers have not yet mastered the smelting process.

　　 There is no alternative. After all, most workers are novices, and failure is inevitable.

　　 But even if Wang Bin and the others knew the reason for the failure of the smelting, Wang Bin and the others still had to test the failed product in order to know the data of the failed product more accurately.

　　Because the experimental equipment here is much more advanced than the old factory, the equipment in the laboratory is much faster, so the test speed is much faster. In less than 20 minutes, the test data of the piece of steel that has failed to smelt at will is out.

　　 As Professor Hu said, the various material content data of this failed product are not correct. Not only is the content of one material inconsistent with the data, but the quantity and data of multiple materials are seriously inconsistent.

However, to the surprise of Wang Bin, Professor Hu and others, the performance data of this failed product surprised Wang Bin and others. Although this steel is far inferior to the bearings they prepared to produce in terms of hardness and wear resistance, etc. Steel, but in terms of high temperature resistance and load resistance, it is higher than the bearing steel they want to produce.

That is to say, the failed product that the workers failed to smelt this time is still a very good high-temperature-resistant special steel. Its highest high-temperature resistance has reached a high temperature of 2561 degrees. At the same time, it is also very good in terms of load resistance. In addition, there are stretch resistance, earthquake resistance, fatigue resistance and other aspects that are very sold.

　　 What makes Wang Bin and Professor Hu even more unexpected is that the red on this material is like rusty places, and its high temperature resistance is even better, reaching 2646 degrees.

When Wang Bin and Professor Hu saw the performance of this material, they all thought of this material for the first time. It can definitely be used to manufacture high-temperature blades for high-performance aero-engines~www.readwn.com~ So Wang Bin let Professor Hu immediately recorded the data of this material, and at the same time asked Professor Hu to study the material to see if the performance of this material can be stabilized, preferably all of them are like red rust spots. Performance.

　　Professor Hu also attached great importance to this. He immediately recorded all the formula and properties of this material.

　　 At the same time, he and Wang Bin walked out of the laboratory again, and asked the workers who were smelting just now, and asked them to recall every step in the smelting process just now.

Of course, at this time, Wang Bin’s expression is no longer the gloomy look before, but he is very happy. This time the workers’ mistakes made him inadvertently get a new special metal, which can still be used as a high temperature aircraft engine. The material of the blade, how could this make him unhappy.

　　 After Professor Hu asked the workers about the related matters, he returned to the laboratory, but Wang Bin did not follow.

　　He asked the workers to continue trying to smelt special bearing steel, and before smelting, Wang Bin also specifically instructed the workers that they must strictly follow the recipe and technology to operate the equipment.

What made Wang Bin depressed was that the second smelting failed. Of course, the failed product smelted this time had no effect at all. Not every failure can be like the previous one, with the patronage of the goddess of luck, making them heavenly work. Technology gets a new material.

　　 The things that made Wang Bin more depressed are still to come. In the subsequent production and smelting process, he failed four or five times in a row, which made Wang Bin and these workers look very ugly.

　　 Even the joy of getting that new material before disappeared with so many failures, and it also made Wang Bin a little doubtful about his life.