Chaoshen Technology Trading Mall

"Mr. Wang! This aircraft that is being assembled with its keel is the first aircraft designed by Tiangong Technology. According to your request, Mr. Wang, our aircraft can not only perform transportation and other tasks, but also perform Tactical bombing missions.

It's just that in terms of the flight speed and altitude of the plane, this plane still can't meet the requirements you expected, Mr. Wang, which is also the double-two standard, because according to our calculations, if you want to meet the double-two standard, this plane must at least install Three or more tg-wsx1 engines are required, and of course three tg-003 turbojet engines can also be used.

But if this is really done, the performance of the aircraft will be greatly reduced, especially in terms of transportation capacity and carrying capacity. According to our estimates, it will be shortened by at least half.

In this case, the practicability of this aircraft will be greatly reduced. After all, as a dual-purpose transport and bombing aircraft, if the range and carrying capacity are too small, then no matter how high the speed and ceiling are, it will be of little use. After entering the workshop, Professor Dai said to Wang Bin.

After Wang Bin heard this, he also nodded and didn't say anything. After all, when the plane was being designed and finalized, in fact, Professor Dai and others had given the plane's design drawings and aircraft performance to him. Wang Bin read it and got Wang Bin's approval before starting to manufacture parts. Otherwise, as a private enterprise, it would be impossible to carry out such a large project without the boss's nod.

Wang Bin and others soon came to the side of the keel of the Phoenix-1 aircraft that was being assembled, and Wang Bin carefully picked up a large number of the keel of the aircraft.

Obviously, the keel of this aircraft is not made of aviation aluminum, nor is it made of titanium alloy. On the contrary, the keel of this aircraft is made of various steel materials that are not commonly used in aircraft.

Of course, these steels are actually not ordinary steels, but are made of special steels newly developed by Tiangong Technology. This kind of steels is not only excellent in various properties, such as heat resistance And oxidation resistance, etc., even compared with titanium alloys, many properties are much higher, and at the same time, this steel is also very light in weight, reaching a level similar to aviation aluminum.

It is this special steel that far surpasses the performance of aviation aluminum and other materials, and this kind of steel is used as the keel of this aircraft of Tiangong Technology.

Although the assembly of the keel has entered the final stage, the workers who assembled the keel did not become negligent because of this, but seriously completed the work in their hands. Even when Wang Bin and the others arrived in their hands, these workers Nor was it found.

And some people, after installing a keel, will carry out multiple inspections. If it is found out that the installation is not in place, they will immediately remove the keel and reassemble it.

Because as soon-to-be technicians, they know very well that sometimes, a small problem may cause a major accident, such as the crash of the Northwest No. 6 aircraft.

Of course, for such an important assembly work, there is naturally a person in charge. After all, Professor Dai is only the general person in charge of this aircraft, but it is impossible for him to get together and take care of everything by himself. The grade is not too young, even if he wants to manage it by himself, he doesn't have the energy anymore.

"Professor Dai! How is the keel assembly of this plane going? Is it going well?" Wang Bin turned his head and asked Professor Dai next to him.

"Mr. Wang! Although the assembly of the aircraft keel has encountered many difficulties, such as the technicians are relatively unfamiliar with aircraft manufacturing, these difficulties are not major problems.

Just check and make corrections.

If all goes well, in these two days, the assembly of the keel of our aircraft can be completed, and then the aircraft can enter the final assembly stage. "

Wang Bin nodded after listening to Professor Dai's words, and asked Professor Dai again: "Professor Dai! Regarding other systems of the aircraft, especially those equipments that Tiangong Technology has not yet been able to produce by itself, is there any contact?" The relevant manufacturers have arrived, and when will these manufacturers deliver the equipment?"

Wang Bin knew that after the keel mechanism of the aircraft was assembled, the next thing to do was to install the various subsystems of the aircraft, such as the aircraft's avionics system and airborne equipment system.

At most, when all these projects are installed, the aircraft will be skinned and painted.

"Mr. Wang! Don't worry, we have already contacted the relevant official manufacturers and scientific research institutions for related equipment and subsystems. Produced chips to ensure the safety of aircraft electronic equipment." Professor Dai said.

Wang Bin looked at the workers who were seriously installing the keel in front of him, and he was very relieved in his heart. Although most of these workers were assembling aircraft for the first time, some of the technicians were in the The engine assembly workshop was transferred, so although the assembly was rusty, they assembled the aircraft keel in strict accordance with the assembly process requirements.

Those who have assembled aircraft engines clearly know that assembling aircraft keels must not be sloppy. Just like assembling engines before, there are strict requirements. Not only in terms of assembly parts, there must be no slight deviation, even when screwing screws and nuts. According to the sequence, there are also technical requirements in terms of tightness.

Of course, when these workers install these keels, they must carefully inspect each keel that has been processed and will be assembled before installation, and they will install it if there is no problem. , If a problem is found, even if it is a small pit or dent, they will directly put the part aside and scrap it directly.

In the next few days, Wang Bin was always with Professor Dai in the final assembly workshop, and because of Wang Bin's joining, the assembly process of this aircraft was also much faster.

In just two days, the keel of the aircraft was installed.

After the installation of the keel was completed, the technical workers immediately sent the keel to another workshop with a smaller area but also more than 100 meters square, where the butt joints were spray painted.

That's right, this workshop, which is smaller than the assembly workshop, is the main painting workshop of their Tiangong Technology aircraft manufacturing, and most of the equipment in the workshop was developed by their Tiangong Technology Machinery R\u0026D Laboratory. , Even if some of them are not developed by himself, they are bought by Wang Bin from the technology mall.

Therefore, this workshop is very advanced, with a high degree of digitalization, automation and intelligence. After sending this huge aircraft keel into this aircraft, all the keel painting was completed in just five days. The keel was sent to the final assembly workshop again.