Chaoshen Technology Trading Mall

So Wang Bin immediately turned around and walked into the mechanical testing workshop.

"Mr. Wang, we have succeeded. We have finally successfully developed an ultra-high-precision CNC machine tool with a precision of 0.001 micron. Most importantly, this machine tool is completely designed and manufactured by ourselves. Yes." When Wang Bin walked into the workshop, he was seen by Yu Pingping who was just at the door of the workshop, so he immediately said to Wang Bin excitedly.

"What? You have developed ultra-high-precision CNC machine tools?" When Wang Bin heard what Yu Pingping and others said, he was also taken aback. You must know that a few months ago, Yu Pingping and others said that they would develop ultra-high-precision CNC machine tools At that time, Wang Bin also agreed to Yu Pingping and others with an attitude of indifference, and also gave some help, but this help was not blueprints, etc., but only help in terms of funds and manpower.

However, for this project of Yu Pingping and others, Wang Bin did not have much expectation. After all, without Wang Bin, he purchased drawings from the system, relying only on Yu Pingping and the others to successfully develop ultra-high-precision CNC machine tools. From Wang Bin's point of view, this is simply impossible.

However, the facts are often unexpected. He never thought that Yu Ping and others could really develop an ultra-high-precision time machine tool.

"This! Is this true?" Until now, Wang Bin still couldn't believe it.

So he immediately looked into the workshop. Sure enough, there was a machine tool in the workshop. If it is distinguished by the type of machine tool, this machine tool should be a small machine tool.

Seeing this, Wang Bin immediately stepped forward and looked at this machine tool carefully. This machine has the materials used in the ultra-high-precision small machine tool developed by Yu Ping and others. Wang Bin is no stranger to him, except for some electronic Except for the components, the others are basically the materials developed by Wang Bin and Tiangong Technology itself.

For example, the ball screw of the machine tool is made of the special glass of Tiangong Technology, and the bed of the machine tool and some castings are all made of special glass. In addition, some of the machine tools are subject to The force parts and wear parts are made of the special bearing steel of their Tiangong Technology. After a rough estimate, Wang Bin found that the cost of this machine tool is really incredible, and its cost is at least several times or even higher than that of the same level of machine tools. More, after all, whether it is special glass or special bearing steel, its cost is not low, at least not comparable to those of gray iron.

After looking at it for a while, Wang Bin found that this machine tool was still a five-axis CNC machine tool, which was even more beyond Wang Bin's expectations. You must know that this is a high-precision five-axis CNC machine tool! Even in the world, there are not many countries that can manufacture it, but such a five-axis machine tool was manufactured by Yu Pingping and others.

"That's right, to be honest, Yu Pingping and Jia Jie, you are really beyond my expectations. I thought it was basically impossible to develop ultra-high-precision CNC machine tools on your own. things.

Even if some achievements can be developed, its precision can only be comparable to that of ordinary precision machine tools at most. At the same time, it is already very remarkable to be able to develop a three-axis machine tool at most.

Unexpectedly, you have developed a machine tool with a precision of 0.001 microns. Not bad, really good! "Wang Bin said happily.

"Mr. Wang! To be honest, we were only running for three-axis high-precision CNC machine tools before. After all, we know our own level, but when we applied for research and development funds from you, Mr. Wang, you did not Any hesitation directly gave us several times the funds we needed, plus many of the equipment inside our Tiangong Technology are the top international equipment, including those machine tools in our precision machining workshop.

It is precisely because of this that we bite the bullet and directly develop five-axis CNC.

However, the difficulty of developing this machine tool has exceeded our expectations. After all, this is also an ultra-high-precision five-axis CNC machine tool!

So we tried our best, and even got in touch with our tutor in college. Finally, with the help of our tutor, we solved these difficulties one by one, and finally developed the machine tool in front of us. "Besides being excited, Yu Pingping is still a little fortunate, because he knows very well that without the tireless investment of Tiangong Technology and the help of his mentor, it would be impossible for him to develop this machine tool.

"Although the funds from Tiangong Technology and your mentor's help are indeed very helpful to the development of this machine tool, the success of this machine tool is also inseparable from your own efforts. All of you You are the biggest contributor.

At the same time, I also very much believe that if you can develop this machine tool, you will be able to develop larger and more precise machine tools in the future. After Wang Bin calmed down his excitement, he said affirmatively to Yu Ping and others.

After listening to Wang Bin's words, Yu Pingping, Jia Jie and others became even more excited.

After knowing it for more than ten minutes, Yu Pingping and the others calmed down a little.

At this time, Yu Pingping suddenly thought of something, and said to Wang Bin: "Mr. Wang, I heard from my mentor that he will retire to the second line after a while, so I want to invite my mentor to our Tiangong as well." Technology, I don’t know what you think, Mr. Wang?”

"What! That's a great thing! Coincidentally, there is no one in charge of the general direction in your mechanical laboratory. It's great that your mentor is here to take charge of the work in your mechanical laboratory.

As for you, Jia Jie and others, I will let you stay in the mechanical laboratory, and Jia Jie, I am going to transfer him to other laboratories to add some burden to him. "Wang Bin said.

As for what burden Wang Bin was talking about, Wang Bin didn't need to say it. Both Yu Pingping and Jia Jie knew that it was the Aerospace Laboratory.

Because as early as when the rocket launch site and the rocket laboratory project started, Wang Bin had already come to talk to them, and asked their opinions at that time, but because Yu Pingping was not very confident about himself, or He said that he didn't have any experience and knowledge in developing rockets, so he finally decided to stay in the mechanical laboratory.

But Jia Jie is different. Although Jia Jie said that when he was in college, his major was also a mechanical major, but because he was also very interested in aerospace, he also had some achievements in rockets. Now Wang Since Bin had already given him this opportunity, of course Jia Jie would not refuse, and agreed on the spot.

Although it is said that the construction of the rocket launch site has not been completed, after all, such a large project will not be completed in a short time, but the military engineering force is not comparable to the civilian engineering force. So far, in such a short period of time, not only have they built several factory areas, but even the first barren hill has been removed in half by the engineering department.

Chaoshen Technology Trading Mall