Chaoshen Technology Trading Mall

In the office, Wang Bin first carefully read the drawings of these business orders received from the official trading company this time.

————

He found that the most difficult part of this order was not the parts on the aero-engine, but a main shaft that he didn't know what it was used for. The length of this main shaft reached more than thirteen meters, and the maximum diameter was two According to Wang Bin's judgment, this may be the main shaft used by a large ship.

One end of this spindle is okay, it’s just a thread, but the precision requirements are a bit high, but the other end is different, not only has many gear-like designs, but also has grooves and holes in many places, and these holes There are big and small holes, and even some holes are not straight, but other angles. They are manufactured, and some places need to be hollow, etc. In short, the processing of this spindle is very difficult.

But fortunately, the steel required for this main shaft is not a super special steel with high performance requirements, only ordinary special steel is enough.

This made Wang Bin heaved a sigh of relief, but even with ordinary special steel, it is not an easy task to manufacture such a big guy.

After looking at it for a while, Wang Bin took the blueprints to the precision machining workshop, and found Master Zhou, the person in charge of the precision machining workshop, and showed him the blueprints.

Master Zhou took the blueprint in Wang Bin's hand, and after looking at it for a while, he said to Wang Bin: "Mr. Wang! Where are you? After picking up such a big guy, good guy, not only in terms of length, but also far away." It far exceeds the limit that ordinary large machine tools can process.

Even in terms of precision, there are very high requirements. I bet, not to mention our county, even in the city, no company can produce this big guy, except us of course.

However, although this big guy is very difficult to process, with the current capabilities of our Tiangong Technology, it can still be processed, but the time required for processing is also very long, at least half a month to complete. "

Hearing Master Zhou's words, Wang Bin heaved a sigh of relief. After all, if he couldn't process it, he could only lower his face and go to the city to reject the order with the official. How about Tiangong Technology, but it will definitely leave an unreliable impression, which will definitely have a great impact on their future business of Tiangong Technology.

So Wang Bin said to Master Zhou: "That's good, then I will give this task to you, if you encounter any difficulties, you can come to me at any time.

As for the delivery time of this order, the official does not have any hard and fast rules, but they hope that we can finish it within half a month at best! "

After Wang Bin and the others took over the order from the city, the entire Tiangong Technology returned to normal, and various business and R\u0026D projects were also proceeding in an orderly manner until almost half a month later. At that time, bursts of cheers came from the mechanical experiment workshop, which disrupted Wang Bin's experiment again, and made him walk out of his laboratory again and came to the mechanical experiment workshop.

"Mr. Wang! We have completed the design and production of the special copper alloy production line you want!"

When Wang Bin heard their cheers and came to the mechanical test workshop where they were, Yu Pingping couldn't wait to come up and said happily to Wang Bin.

"Very good! Have you tested it? How is the production line running?" Wang Bin also asked Pingping with a smile.

"Mr. Wang, the production line has already gone through a trial run, and the production process went smoothly without any problems!" Yu Pingping replied.

"That's good! But don't be too happy, you have already conducted a trial run on this production line before, but it was just an empty machine, so you can't really confirm the situation of this production line.

Let me see it like this! Let's conduct a trial production on this production line immediately to see the situation of the production line! "Wang Bin said.

"Okay!" Yu Ping and the others said.

After speaking, Wang Bin took Yu Ping and others out of the experimental workshop, came to the raw material warehouse, and directed the workers to move some raw materials to the experimental workshop, preparing to test the production line.

Soon, with the cooperation of the workers and masters, the raw materials they needed were successfully taken to the experimental workshop, put into the production line, and started the production line.

Yu Ping and the others also consciously entered the positions of operators on the production line and started the production line.

Soon, the first batch of copper-based room-temperature superconducting material solution produced on the production line, under the attention of Wang Bin and others, slowly left the solution outlet of the production line and entered the mold that had been prepared long ago. .

Since this is only a small production line, and this time it is only a trial production, the copper-based room temperature superconducting materials produced this time are not many, only half a ton.

Soon, the solution in the production line has all been poured into the mold.

With the efforts of the workers and masters, these molds were put into the special coolant that Wang Bin had prepared for cooling.

Ten minutes later, these molds were salvaged from the special coolant in the eyes of everyone.

When these molds were salvaged and placed on a pallet of goods, Wang Bin immediately stepped forward to check the materials.

When he came to a mold, Wang Bin first looked at the color of these materials. After all, this is the easiest place to judge. If the color is wrong, it naturally means that the copper-based room temperature superconducting material produced this time has failed.

To Wang Bin's relief, there was nothing wrong with the color of the materials produced this time, and they were the same as those he produced in the laboratory, no difference!

Then Wang Bin opened one of the molds, took out a piece of material from it, weighed it, and then knocked on it. There was nothing wrong with the sound, and Wang Bin felt relieved a lot, because according to the According to his observation, the copper-based room temperature superconducting material produced this time is likely to have become a superconducting material.

Of course, this is only the result of other people's judgment. Whether this production line is really successful in the first trial production depends on the test results of professional instruments.

So, Wang Bin immediately took a piece of material to his laboratory and began to test the material.

Not long after, Wang Bin completed the analysis of this material and got the result, that is, the performance indicators of these copper-based room temperature superconducting materials produced this time have reached the required data, that is to say, this time The production line developed by Yu Pingping and the others can definitely produce copper-based room temperature superconducting materials.

So Wang Bin got up, went back to the mechanical research and development experiment workshop, and told Yu Pingping and the others the news.

Please remember the first domain name of this book: . The fastest website for mobile version updates: