Chaoshen Technology Trading Mall

Because this second-generation superconducting battery has solved many problems of the first-generation battery,

So this battery can already be used in a larger caliber electromagnetic rail gun as a source of energy for the rail gun.

But even this kind of battery can only provide energy support for a rail gun with a caliber of 15mm at most, and even a rail gun with a caliber of 15mm can only be fired continuously for about fifty times.

Of course, according to the law of mass-energy, the smaller the caliber of a railgun, the more shots it will take. For example, if it is a railgun with a caliber of 6-7 mm, this superconducting battery can definitely support hundreds of continuous shots.

Then came the third-generation copper-based superconducting battery technology, which is the final copper-based superconducting battery technology entered into his mind in the system. This kind of superconducting battery has a higher energy density per kilogram, up to 100 degrees per kilogram. degree of electricity.ァ新ヤ~⑧~1~中文网ωωω.χ~⒏~1zщ.còм

At the same time, it can also be made larger in terms of volume, and the maximum can even reach the size of one cubic meter.

At the same time, in terms of instantaneous discharge voltage, compared with the second-generation technology, it has made great progress, reaching 5,000 charges. At the same time, like other copper-based superconducting batteries, it can also directly discharge all the batteries in the battery within one second. All the power is released.

Of course, compared with the first and second-generation copper-based superconducting battery technologies, the third-generation technology is also the most difficult, and it is not easy to realize the third-generation technology.

.........

Just when Wang Bin was working hard to realize the superconducting battery technology in his mind in the laboratory.

He didn't know that at this time, several bearing steel manufacturers that had completely lost their market share in China were preparing to make trouble, refusing to admit defeat at all.

Ruisi

In a conference room at the headquarters of Ruisi Precision Equipment Manufacturing Group, all the executives of their group have arrived except the chairman of their group. Of course, this naturally includes the person in charge of the Chinese market of their group.

"Hey! This time Huaxia's high-end bearing steel is reshuffled. We Ruisi Precision Equipment are one of the biggest losers! Except for Bald Eagle's ABC and iron female bearings, we are the worst.

You must know that before this, our Ruisi Group had a market share of almost 20% in China's high-end bearing market! It is one of the largest high-end bearing suppliers in the entire Huaxia market, and even many official companies in Huaxia use our bearings in large quantities, including military ones, but now our bearings have actually been reduced to second-rate bearings! "

"Isn't it! This made me wonder if I was dreaming. You must know that the bearings produced by our group are absolutely advanced even in the whole world! Now they are almost kicked out like this. Huaxia Market."

"Damn it, it's all to blame for the island country Seiko Group and the Imperial Precision Instrument Group. If they hadn't been the first to sell a large number of high-end bearing steels in China, it would be impossible for those high-end bearing manufacturers in China to be in such a short period of time. It is impossible for so many high-end bearings to appear in Huaxia's market all of a sudden. As a result, the high-end bearings we export to China have completely become second-rate products. You must know that these bearings are even if they are placed In the world, there are not many companies or countries that can produce it!"

"Yes, it's them? But the culprit? Which Tiangong special material manufacturing company in Huaxia, if it wasn't for their company to sell the world's top bearing steel? ? It is also impossible to sell the world's top bearings and bearings to China? Naturally, it is impossible for us to become a second-rate bearing.

"

"Yes, they are from Huaxia. If it weren't for this Tiangong Special Materials, we wouldn't have to bear such a big loss.

You know, we have established several high-end bearing production factories in Huaxia! But with the situation of the bearing market completely changing? What we invested before was completely in vain? In this way, if we are really completely driven out of the Chinese market, the loss will not only be in the bearing and bearing steel market , and those factories that invested in Huaxia before! All of this is due to Huaxia's Tiangong Special Materials. "

At this time, the top executives of Ruisi Group all pointed their finger at Wang Bin and Tiangong Special Materials Company under Tiangong Science and Technology, but they didn't think about it? Why didn't Daoguo Seiko and Imperial Precision Instrument Group not participate in this meeting? In the market reshuffle, lost the original share? On the contrary, the market share in China has increased a lot. The deeper reason? In fact, they all know it very well? It's just that they don't want to admit it.

However, when the senior management of their group was talking about Tiangong Special Materials Company, the executive president of their company finally walked in quickly from the door of the meeting room, but at this time their president's face was not good-looking, even There was still a lot of anger in his eyes.

In fact, he can’t be blamed for this. Before this meeting, their group had just held a board meeting. During the board meeting, he was sprayed by the company’s directors for a whole morning. It can be said that in the mouth of the group’s directors, he almost became It can be said that no matter who hears these words, they will not look good.

Seeing the face of the president of his company, the entire conference room fell silent. Looking at the face of their president, one knew that if someone came forward, he would definitely be the unlucky one who vented his anger on the president.

"The purpose of calling everyone to this meeting, I think everyone is very clear, is for the Huaxia bearing market.

Since this period of time, Huaxia Tiangong Special Materials Co., Ltd. has developed a new type of international top-level bearing steel, and has begun to provide a large number of major bearing manufacturers in Huaxia at the price of cabbage. This has directly led to the shrinkage of our orders in the Huaxia bearing market. .

Coupled with the bearings and bearing steel produced by the two major companies of Shimuni Seiko and Imperial Precision Instruments, the large-scale price reduction made the sales of our company's bearings even worse. The same large-scale price reduction measures have been adopted, but it has not helped. Our bearings have become second-rate products in the Chinese market.

So we have to find a way to grab back our original market in China. If everyone has a good way, they can speak freely and let everyone discuss whether it is feasible. "

However, after the executive president of their company finished speaking, about 10 minutes later, the entire meeting room was silent, and no one made any comments at all, which made him even more annoyed.

So he was furious and said loudly: "What! Are you all dumb? You are all executives and think tanks of our Ruisi Group. Could it be that this trivial matter makes you think of a way? You have nothing to do. You are all free food What? The company spent so much money, what are you doing here!"

Just when the president of their company was furious and finished speaking, someone in the conference room finally stood up and said softly: "Mr. President, I suggest that our company sells various types of bearings in China, including top Including bearings, we can continue to take price reduction measures, and it must be cheaper than the bearings produced by the two major companies of Shimuni Seiko and Imperial Precision Instruments.

At the same time, in terms of bearing steel, I remember that our company has just developed a new type of bearing steel this year. According to the performance of this bearing steel, although it cannot reach the top level in the world, compared with Shimuni Seiko and Imperial Precision Instrument However, the performance of these bearing steels sold by the two major companies in China is much higher than that in all aspects.

So I think we can put this bearing steel into China's bearing steel market, and in terms of price, we can be the same as Shimuni Seiko and Imperial Precision Instruments Group, or even cheaper.

Although selling in China at such a price, our profit margin is very small, and we may even lose money, but it can hit other manufacturers and sellers of bearing steel and bearings in the Huaxia market.

And this includes the island country Seiko Group, the Imperial Precision Instrument Group, and the Huaxia company that just launched high-end bearing steel. First release (www) m/.x81zw./com/

Although even if we do this, we will not be able to completely defeat the island country Seiko Group and the Imperial Precision Instrument Group in the Chinese market, but at least it can shrink the market share of these two companies in China, so that we can snatch their market.

Also, according to my investigation, Tiangong Special Materials Company was originally just a smelting company that produced ordinary special steel.

Therefore, it is very limited in terms of strength. At the same time, according to my estimation, the cost of this bearing steel produced by this Huaxia bearing steel manufacturer is not cheap. After all, the performance of this bearing steel is where they are. The bearing steel sold by this company should have very little profit at the current price.

So as long as we sell this bearing steel in China at a low price, then I think it will not be difficult to regain market share.

Even if it is possible, we can directly reduce the price to the same or even lower price than the bearing steel sold by this company at a certain time. Then according to the scale of this company, it will not last long at all. This company still acquires their technology, and it is not up to us to decide.

And as long as Huaxia's bearing steel company collapses, Huaxia's bearing steel and bearing market will return to the original situation, and the price of bearing steel will not be up to us. "

The executive president looked at the person who stood up and spoke. It was the person in charge of the Huaxia market in their company. At the same time, he knew the situation in the Huaxia market the most. After hearing what he said, the president's face became much better.

"It's a good idea! You can try it!" After speaking, he motioned for the Huaxia marketing director to sit down first.

Then he said again: "Anyone else have any suggestions?"