Blooming America

Chapter 646: Those things about CNC machine tools

Drake, he is an employee of General Motors.

He is one of the people selected to cooperate with Xunlei.

The Thunder Lab recently developed a powerful ternary computer.

It is said that this kind of computer can reduce the volume of the computer used by the original numerical control ang, and increase the reliability by at least five times, so he is very interested in this product.

In front of Drake, an ANG stopped. This is the new CNC sharp chuáng that Xunlei Lab cooperated with last time. This sharp chuáng has an SED screen instead of the previous CRT screen.

Although the color is only black and white, it is better than CRT in terms of image stabilization.

The SED screen has no geometric distortion, so it is more suitable for use as a CNC screen.

Especially when the system is running in simulation, the images seen are all completely straight lines, instead of being like CRT monitors. Various curves may appear, but in fact it is also a straight line. That's it. At that time, for the observers, the misjudgment they may produce may be fatal!

Moreover, as a control screen, CRT monitors are more prone to various problems, such as high-voltage package errors, problems with picture tubes, etc., which are more likely to have problems than SED screens. In case of moisture, it will also affect the display of the screen.

Sometimes, Drake is also feeling why the development of CNC ang can be so rapid.

Numerical control áng needs to process a program, first of all it needs to be "programmed".

This programming is the same as writing software. Ang will process the product according to the programmed procedure.

Ten years ago, Drake used CNC ang, which is not uncommon in General Motors.

But the products at that time required paper tape for input.

But now, a small "3" can make the main shaft of the car chuáng spin up, and then input a "600" main shaft to rotate forward at a speed of 600 revolutions per minute.

Input another "!" command, the spindle will start to work, and then process with the system.

There is also M98PS, you can also call a subroutine, and then program in the subroutine...

After getting used to it, this kind of thing seems very simple, but when you think about it, you can always feel incredible.

Enter a small string of characters into the computer, and then you can control the CNC car chuáng to car out a part you want. And myself, I just need to watch it by the side.

With a small command, you can do many things that you once needed to control manually ......,

Everything is like a miracle.

In a simple way, the processing that used to take a long time to be completed manually is completely completed. This is something that only a few can do.

And the only thing that needs to be done manually is just setting the knife.

Easily turn a blank into a complete part.

This incredible thing is the CNC car chuáng.

"Mr. Drake, I just took a look at General Motors' instructions on the use of new products."

At this moment, a researcher came over. The other party also held a large stack of documents.

"What?" Drake asked strangely.

There is a cooperative relationship between the two parties. Thunder Lab is a new laboratory after Bell Labs. It is also a very powerful laboratory with strong technology.

Next in line is Rama Lab, which has developed mobile phones.

The reason for choosing Xunlei is that in addition to the relationship with Intel, Xunlei's technical content is also one of the reasons GM chose to cooperate with him.

"I think your company's plan... does not fully utilize the xìng capabilities of ternary computers. Ternary computers have more powerful effects in the use of logic. I think your ideas can continue to be bolder... "

"Bolder?"

Drake felt that his product was bold enough.

"Yes, you can completely hand over all the work to the computer. You only need to enter the program, and you can leave it alone. The computer will take care of everything, of course, as long as there is no problem with the program itself." The technician was obviously right. My own technology is very confident: "Our CNC can completely realize integrated processing. As long as there are sufficient conditions, we only need to perform one xìng processing to complete all the work. Moreover, all of this It is done by the computer."

"Oh?" Drake really didn't expect that the other party would dare to say such a thing.

In fact, it's not just that.

The technology of Lucas and Spielberg using supercomputers to produce 3D graphics has also inspired these researchers. They are now thinking about whether they can create a real 3D

Drawing tools, then create a 3D object in the computer, and then let the computer automatically perform processing calculations and command generation based on the shape of the object, so as to achieve complete automation. This is what they have always wanted to study.

"One thing, in fact, if the work is completely handed over to the computer, in fact, our design can be easier..." In fact, this sentence is the main meaning of the other party, but Drake does not Don't care.

"Then our plan..." We have designed a new plan. "The other party handed over a document.

But Drake was a little strange.

How do they feel more positive than themselves?

Shouldn't you be the main sharer on your side?

Drake was a little strange, but the other party seemed to be still talking to himself diligently.

………what's going on?

Of course he did not understand that Catherine had already promised the other party a bonus. This is what made the other party so positive...

After ten months of development, Catherine's cloud system has gained more than 5% of cable TV in the United States at a rapid pace. If you want to get the remaining 50%, it is only a matter of time. Up.

The power of the cloud system has completely replaced the previous generation of cable TV networks. For these ordinary people, the biggest manifestation of the matter is that they have now increased their net profits by more than 100%.

Of course, Catherine knew that if you really want to make money, investing in industrial products is also a very important thing.

The economy cannot remain sluggish like this forever.

On the other side, the development of this kind of CNC will get better and better.

From the perspective of the development of CNC systems, CNC ang has developed the 21st century from five generations of Catherine. In practical applications, in addition to the ang industry, numerical control technology is also applied in other departments, resulting in various numerical control equipment.

Catherine was not a mechanical major at the time, so she was not very clear about the things in it.

Initially, people considered how to increase the degree of automation on a device. For example, increase the number of control axes, such as a multi-axis CNC system (just before Catherine came to this world, the world's most powerful CNC system can control up to 24 axes.). For another example, the "machining center" that realizes multi-process automatic control on one device is a multi-process CNC ng. On one ng, it can realize multiple functions such as turning, sharpening, drilling, knurling, and tapping. Later, it was discovered that the processing speed of the electronic computer is faster than the processing speed of the numerical control equipment. One computer can control multiple numerical control equipment, which is used to be called the group control system or direct numerical control system.

Catherine was not clear about these, but when she came into this world, she had heard a news, although because of the age, Catherine was still very clear about those memories.

The news is that the Americans have developed a rapid prototyping system that can process metals.

The so-called rapid prototyping system, some people call it "three-dimensional printing technology", a technology that allows the machine to quickly "print" the originally designed product into an entity at once.

And this kind of high-precision computing skills is the representative of the development of data.

So in this regard, no matter what Lou does, there will be no loss. Moreover, even now, if other people want to develop CNC ang, they must hire some experts from Catherine's company to make a new CNC ang.

As far as programming is concerned, the ternary computer industry can make it more convenient for them to make changes, and the system is more stable and efficient.

Although Catherine's main business cannot be said to be CNC ang, since she now wants to develop a ternary computer, she must have a new mechanism.

Although the development of CNC ang is not very clear so far, as far as the future is concerned, Catherine has grasped the development trend of digital airport: the main control machine is developing towards multi-bit microprocessor: the numerical control device is moving towards integration And the direction of intelligent development: CNC system adopts modular structure: CNC programming is more graphical and automated: CNC system is more reliable and pleasant~www.wuxiaspot.com~ These elements are the main points of CNC development.

And these developments are almost the development of digital computers among them!

As for the development of digital computers, according to Catherine, the current ternary computer is the best.

Although the industrial control version of 80 is very good, it can only be used in general CNC machining. For fine machining, more complete equipment is needed.

And Catherine's idea was to use a more stable and convenient ternary computer to do it.

First, as far as the current ternary computer technology is concerned, this technology is born out of the Soviets. The products of the Soviets, to put it vulgarly, are also shown in their computers.

Well, when it comes to my major, I accidentally wrote more and there is one more. ! .

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like